Qumtrix / LTE-NB Smart Lock / Hardware manual

NB Mortise Doorlock hardware manual

4G NB-IoT mortise smart lock with NFC · v1.1 · May 2025 · 13 pages

The hardware manual for the NB Mortise Doorlock, the battery-powered 4G NB-IoT mortise lock in the LTE-NB smart lock family. It documents how the lock is operated without any external cabling — digital keys over the mobile network, NFC cards and phones presented to the reader, time-limited PINs — together with the technical data, the IR and NFC wake-up behaviour, battery life and replacement, the care rules and the installation sequence. The tables and figures are reproduced on this page; the PDF is the same document for print.

Document number
MORTISE SMARTLOCK
Edition
20252405 · May 2025
Version
v1.1
Length
13 pages
File
PDF · 762 KB · English edition
Applies to
LTE-NB Smart Lock (NB Mortise Doorlock)

What this manual covers

The lock is operated completely independently of any external cable connection. To unlock, any authorised smartphone that can reach the internet can be used; smartphones with built-in NFC — most Android phones — and authorised NFC tokens can be held in front of the reader within 2–4 cm. With an authorised device or token, a mechanical coupling is activated for a few seconds and the mortise mechanism can be operated.

The system is completed by cloud access-management software, the Digital Keys apps for Android and iOS, and the NFC cards supplied with each lock. Digital keys can carry an expiry, so a key can be issued for a defined window and deleted remotely without anyone attending the door. The manual covers the hardware and the operator-facing procedures; programming is described in the accompanying software manual.

Key figures at a glance

ItemValue
Radio moduleTelit 310gWW 4G-IoT / LTE-M module (CAT-M, 3G/4G fallback)
Battery2× AA 3.6 V lithium + 2× SPC1550 supercapacitors
Battery lifeApprox. 2 years, or approx. 20,000 operations
Unlocking methodsDigital Keys app · NFC cards and phones · time-limited PIN · remote unlock from the cloud software
DimensionsL 300 × W 50 × B 22 mm
HousingStainless steel with armoured-glass numberplate
Temperature and humidity−10 °C to 60 °C · 20 to 95% RH
SIM5G IoT nano SIM (global roaming or local)

Contents of the manual

SectionPage
Introduction summary, technology, operation, flexibility, security4
Technical data6
What is included7
General information and programming8
IR sensor wake-up mode / NFC wake-up mode8
Operator guidance, unlocking, time zones, NFC tokens9
Battery replacement10
Battery notifications, care and maintenance, installation11

Technical data

ParameterValue
Display elementsAcoustic signal (buzzer) for command received and for a failed verification
Battery2× AA 3.6 V lithium batteries + 2× AA supercapacitors SPC1550
Battery lifeApprox. 2 years or approx. 20,000 operations
Temperature range−10 °C to 60 °C
Relative humidity20 to 95% RH
DimensionsL 300 mm × W 50 mm × B 22 mm
Surface housingStainless steel with armoured-glass numberplate
4G NB-IoT moduleTelit 310gWW 4G-IoT / LTE-M module (CAT-M, 3G/4G fallback)
SIM card5G IoT nano SIM (global roaming or local)
Unlocking methodsDigital Keys app · NFC keycards programmed for time-sensitive use with the Digital Keys app (including NFC HCE-compatible phones) · time-sensitive PIN · remote unlock button in the cloud lock-management software

Security model

The 4G NB-IoT module in the lock applies 2048-bit RSA encryption, and all communication between the vertical applications — software and hardware — runs over HTTPS with 128-bit encryption. Between the mobile network and the IoT device-management platform an IPsec layer is provided; on some occasions the operator also supplies a dedicated VPN for further security and reliability.

NB-IoT is part of the local mobile networks and is managed with the standardised security of the 4G standards, which is what guarantees the credential and the integrity of the data travelling through it; 4G IoT has passed the security protocols outlined by 3GPP and GSMA.

IR and NFC wake-up

Option 1 — IR sensor wake-up

An infrared sensor inside the lock wakes the unit within about two seconds when somebody is nearby — within roughly four metres — or when a hand is waved in front of it. The operator then presents an NFC DESFire EV3 card to unlock. If the credential verifies against the records held in the lock, the door unlocks and re-locks automatically after about five seconds. If verification fails, a buzzer sounds and the lock immediately opens a 4G/NB-IoT connection to fetch the current authorisation from the server backend.

Option 2 — NFC wake-up

The lock also supports NFC wake-up: holding an NFC device close to the RF area of the lock for more than four seconds wakes it, confirmed by the wake-up buzzer. The mobile link is still used for live audits, live battery status and live notifications, but the unlock itself happens locally.

Operator guidance and unlocking

  1. Wake the lock by holding an NFC card against it for four seconds, or let the IR sensor detect a person.
  2. A buzzer sounds to confirm the wake-up.
  3. Present the NFC DESFire EV3 card to unlock; the lock re-locks automatically after five seconds.
  4. Pull the handle down to open the door.
  5. Pull the handle up to engage the deadbolt for added security.
  • Time zones. Locks use local internet time, set when the lock is commissioned by the local distributor. A lock can be programmed with time slots as short as 30 minutes; when a digital key expires, its unlock icon disappears from the app.
  • NFC range. NFC phones and tokens must be held 1–4 cm from the reader pad; there should be no delay in the lock being ready to open.
  • NFC media. Only the special Digital Keys NFC cards and tokens work. Cards bought online from third parties, or from resellers not certified for the system, will not operate the lock. Two tokens are supplied per pack.

Battery replacement and monitoring

  1. Slide the black battery-case cover down on the back of the lock.
  2. Place the batteries into the holder as shown in the manual.
  3. Slide the cover back into place.

No digital keys are deleted during a battery change. Live battery status is shown in the access-management software, and account administrators can configure email notifications for when battery status falls below 10%.

Care, maintenance and installation

  • The lock is maintenance-free. It must never be oiled or greased, and lubricants containing mineral oil must not be used.
  • Clean only with non-stick, residue-free cleaning and disinfection agents. Abrasive agents and acids must not be used.
  • Although the lock is weatherproof, do not spray it with a high-pressure hose: this can damage the product and excludes liability.

Installation follows the sequence in the manual: the lock is mounted with the supplied strike plate, the nano SIM is fitted, and the unit is commissioned from the access-management software by the local distributor. The distributor, together with the lock purchaser where required, is responsible for ensuring the device is mounted according to recognised technical guidelines and the regulations of the country of use.

What is included

  • EU/ANSI stainless-steel 4G-NB IoT Mortise Doorlock
  • Nano SIM card (5G IoT / LTE-M)
  • NFC keycards
  • Strike plate

Document history

EditionVersionDateNotes
202524051.1May 2025Current issue of the NB Mortise Doorlock hardware manual; replaces all previous issues.

This manual predates the 2026 Qumtrix datasheet format used by the RTK manuals, which is why its document number and edition follow the older scheme.

Read the manual here

The full 13-page PDF, embedded. If your browser does not render it inline, use the download link below.

Download the PDF · Open in a new tab

Qumtrix

Customized IoT solutions built on hardware, firmware and cellular connectivity. Combining in-house engineering, OEM/ODM manufacturing and support across the full product lifecycle.

HEADQUARTERS Room A411–A413, No. 99 Daxue Road
Xuzhou, Jiangsu 221116
China

FOLLOW US

Get the latest technical insights

Copyright © 2026 Qumtrix · A brand of Ennfu Scientific. All rights reserved.