Qumtrix / BASE-G5 / Datasheet & hardware manual

BASE-G5 datasheet and hardware manual

Multi-band RTK GNSS board with dual-antenna heading · Rev 1.0 · September 2026 · 11 pages

The combined datasheet and hardware manual for BASE-G5, the multi-band RTK GNSS board built on the Septentrio mosaic-G5 engine with P3H dual-antenna heading. Eleven pages cover the compact all-constellation engine, its L1/L2/L5 tracking, the 0.15° heading at a one-metre baseline, the interfaces and timing a base or rover needs, and the ordering terms. This page reproduces the technical tables in HTML; the PDF edition is the print artefact.

Document number
BASEG5_DS_HW_MANUAL_1.0.DOCX
Edition
20260926 · September 2026
Version
v1.0
Length
11 pages
File
PDF · 838 KB · English edition
Applies to
BASE-G5 (BASE-G5)

What this manual covers

BASE-G5 is a plug-and-play hardware front end for autonomous platforms and RTK base stations, built on the Septentrio mosaic-G5 receiver. The same board serves as a fixed reference on a tripod or as the moving rover, tracking L1/L2/L5 across GPS, GLONASS, Galileo, BeiDou, QZSS, NavIC and SBAS. Dual-antenna P3H heading is derived from the MAIN/AUX pair without a magnetometer, so it stays valid while the machine is standing still.

The document collects the published datasheet together with everything needed to commission the board: specifications, the G5-versus-X5 comparison, the advantages Septentrio's firmware suite brings (LOCK+, IONO+, APME+), interfaces and timing, configuration, target applications and the shipping terms. It is written for an integrator who has to design the board in and bring it into service from one document.

Key figures at a glance

ItemValue
ModuleSeptentrio mosaic-G5, multi-band, multi-constellation
ConstellationsBeiDou · GPS · Galileo · GLONASS, plus QZSS and SBAS
BandsL1 / L2 / L5 tri-band
RTK accuracyHorizontal 0.6 cm + 0.5 ppm · vertical 1 cm + 1 ppm
Heading (P3H)0.15° at 1 m baseline · 0.03° at 5 m baseline
Time to first RTK fixTypically under 7 s
Power≈0.44–0.6 W typical · 5 V input over USB-C
Footprint22 × 16 mm module · −40 °C to +75 °C

Contents of the manual

SectionPage
1. Introduction summary4
2. Product overview and technology5
3. Technical data and specifications6
4. Core advantages7
5. Interfaces, protocols and timing8
6. Configuration and operation9
7. Target applications10
8. Ordering, shipping and support11

Technical data

ParameterValueNote
ModuleSeptentrio mosaic-G5Multi-band, multi-constellation RTK GNSS receiver
ConstellationBeiDou / GPS / Galileo / GLONASSQZSS and SBAS supported, centimetre-level RTK
Anti-interferenceAIM+Built-in anti-jamming and anti-spoofing for harsh RF
Power input5 V USB-CUSB-C or external VIN supply
Operating temperature−40 °C to +75 °CIndustrial wide-temperature operation
Frequency bandsGPS: L1C/A, L1C, L2C, L2P(Y), L5 · GLONASS: L1CA, L2CA, L2P, L3 CDMA · Galileo: E1, E5a, E5b, E6 · BeiDou: B1I, B1C, B2a, B2I, B2b, B3I · QZSS: L1C/A, L1C, L1S, L2C, L5, L6 · NavIC: L5 · SBAS: EGNOS, WAAS, GAGAN, MSAS, SDCM (L1, L5)Full band list as published in section 3
PositioningRTK, centimetre levelHorizontal 0.6 cm + 0.5 ppm · vertical 1 cm + 1 ppm
Init timeTypically under 7 sTime to first RTK fix
Heading0.15° (1 m) / 0.03° (5 m)0.15° at a 1 m baseline, 0.03° at 5 m
ApplicationAGV / UAV / surveyingAutonomous machinery, robotic automation, RTK base station

Where G5 and X5 each win

Itemmosaic-G5Mosaic-X5
BandsL1 / L2 / L5 (multi-band)L1 / L2 / L5 + L6
ConstellationGPS / GLONASS / Galileo / BeiDou / QZSS / NavIC / SBASSame full multi-constellation
Anti-jammingAIM+ anti-jamming and anti-spoofingAIM+ anti-jamming and anti-spoofing
RTK rateUp to 20 HzUp to 20 Hz
HeadingP3H dual-antenna, magnetometer-freeDual-antenna (model-dependent)
TimingSolid timing (5 ns)Extreme timing performance
Power, size≈0.44–0.6 W · 22 × 16 mmHigher power (L6 adds demand)
PositioningMulti-band price/performance sweet spotL6 and timing-critical applications

Core advantages

AIM+ RF security and anti-spoofing

  • Jamming: actively detects and suppresses narrowband CW and wideband or pulsed interferers.
  • Anti-spoofing: rejects deliberately spoofed signals so the position stays trustworthy.
  • Spectrum: real-time RF interference monitoring through the web UI.

Full-constellation tri-band tracking covers GPS, GLONASS, Galileo, BeiDou, QZSS, NavIC and SBAS on L1/L2/L5, which is what gives the board its multipath resilience in city canyons. Up to 20 Hz RTK output suits UAVs and fast-moving platforms, and heading comes from the antenna pair rather than a magnetometer. Septentrio's LOCK+ keeps tracking under heavy vibration, IONO+ mitigates ionospheric scintillation during high solar activity, and APME+ reduces reflections from buildings and ground. The whole GNSS front end sits in a 22 × 16 mm footprint at roughly 0.44–0.6 W.

Interfaces, protocols and timing

ParameterValueNote
InterfacesUSB-C / dual UART / TFDual-SMA antenna inputs, raw data logging to a TF card (max 32 GB)
Time syncPPS / EVENTNanosecond-level PPS output, EVENT time-mark input
Timing accuracy5 nsTiming and 1PPS accuracy
AntennaMAIN / AUXDual antenna input for the heading calculation
I/O2× UART · USB 2.0 HS · TF card · 2× Event In · 2× GPIO · 2× PPS outBrought out on headers for direct integration
ProtocolsNMEA, RINEX, SBF, RTCM v2.x/3.xData formats and protocols supported

The TF card is limited to 32 GB in the manual. Raw logging is what makes post-processed kinematic work possible after a mission.

Configuration and operation

The module is configured locally in a browser: no cloud account and no software to install. Configuration is saved to the board and persists across power cycles, so a base station can be built, configured once and then deployed. For receiver-level command syntax the manual refers to the official Septentrio documentation.

Target applications

  1. RTK surveying. One board covers both ends of a survey: a fixed reference on the tripod and a moving rover on the pole, with tri-band tracking that holds centimetre fixes through building and ground multipath.
  2. UAV surveying. Up to 20 Hz RTK goes straight to the flight controller over USB-C or the dual UART, while LOCK+ keeps tracking through multi-rotor vibration.
  3. Precision agriculture. Vibration-robust tracking and magnetometer-free P3H heading keep guidance true on heavy machinery, at a typical draw around 0.44–0.6 W that the machine's own supply can carry.

Ordering, shipping and support

  • Shipping terms. Goods are quoted FOB Shanghai Airport. The default carrier is DHL Economy, freight is prepaid by the seller and added to the invoice, and delivery to the airport is free of charge. Air freight takes 7–10 days and express courier 3–5 working days, depending on the destination region and the carrier's official tracking.
  • Main markets. Europe, the Middle East, the USA and South America; shipping is worldwide.
  • Volume discounts. Discounts are granted at the seller's discretion according to project volume. For special projects and long-term partners, terms and pricing are negotiable — tell us the expected volume and the deployment plan and we will quote accordingly.

For datasheets, samples and integration questions, write to sales@qumtrix.com.

Document history

EditionVersionDateNotes
202609261.0September 2026First issue of the combined datasheet and hardware manual. Replaces all previous issues.

Read the manual here

The full 11-page PDF, embedded. If your browser does not render it inline, use the download link below.

Download the PDF · Open in a new tab